Reference Manual

The Channel List
120 2110 SSB Transceiver Reference Manual
The new channel is created and the List Manager remains open.
1 If you want to view the channel you have created, press to close the List
Manager.
Renaming a channel
When you rename a channel, references to the channel in other lists are not automatically
updated; you need to go to the Address, Network and Phone Link Lists and update any
references to the channel.
For example, if the channel you renamed is used in a network, go to the channel/mode
list for the network, find the reference to the old channel name, then edit it so that the
new name is displayed (for help see page 129, Editing a network). If you do not update
the reference to the channel, the channel will not be scanned when scanning is switched
on.
Renaming a channel is a standard list function. For help see page 98, Renaming an entry
in a list.
Copying a channel
Copying a channel is a standard list function. For help see page 99, Copying an entry in a
list.
Editing a channel
Editing a channel is a standard list function. For help see page 99, Editing an entry in a
list.
Deleting a channel
Deleting a channel is a standard list function. For help see page 100, Deleting an entry
from a list.
Mode • enter a mode
NOTE
If multiple modes can be added to the
channel, select the new mode and press .
If you do not want to add another mode,
press .
NOTE
If you disabled the transmit frequency, dashes are displayed in place
of the transmit frequency.
If this prompt is
displayed...
Do this...