Reference Manual
Table Of Contents
- Table of contents
- 1 About this manual
- 2 2110SSB Transceiver compliance
- 3 HF radio transmission
- 4 The 2110SSB Transceiver
- 5 Preparing the 2110SSB Transceiver for use
- 6 Operating the transceiver
- 7 Using lists
- 8 The Channel List
- 9 The Network List
- 10 The NETList
- 11 The Phone Link List
- 12 The Address List
- 13 Making and receiving calls
- 14 The Control List
- 15 The Keypad List
- 16 The Mode List
- 17 Using the transceiver in free tune and Amateur Mode
- 18 Hot keys
- 19 Operating the transceiver from a computer
- 20 Connectors
- 21 System messages
- 22 Accessories and hardware options
- 23 Specifications
- Index
- List of figures
- List of tables
- 1 About this manual
- 2 2110SSB Transceiver compliance
- 3 HF radio transmission
- 4 The 2110SSB Transceiver
- 5 Preparing the 2110SSB Transceiver for use
- Charging a battery
- Connecting a battery to the transceiver
- Inserting the transceiver into a backpack
- Selecting an appropriate antenna
- Troubleshooting the transceiver
- Testing the installation
- 6 Operating the transceiver
- Switching on the transceiver
- The front panel screen
- The channel screen
- Entering and editing text
- Quick Start
- Muting the transceiver
- Scanning channels
- Using the microphone
- Finding words and values
- Setting the basics
- Using hot keys
- Tuning the antenna
- Using the clarifier
- Reducing background noise with Easitalk
- Using the voice encryptor
- 7 Using lists
- The Main Menu
- Selecting a list
- The List Manager
- Setting a marker
- Setting the home screen
- Changing a setting in the Control List
- Making changes to all other lists
- Hiding and showing settings
- Grouping and ungrouping entries
- Restricting access to information
- Logging into admin level
- Displaying full and normal view
- Hiding and showing information
- Locking and unlocking information
- 8 The Channel List
- 9 The Network List
The Channel List
2110 SSB Transceiver Reference Manual 119
Programming the Channel List
Creating a channel
This section covers creating a channel in a transceiver where receive and transmit
frequencies can be entered.
To create a channel:
1 Press VIEW until the channel screen is displayed.
1 Use the List Manager to create an entry (for help see page 97, Creating an entry in a
list and page 52, Entering and editing text).
1 Enter the setting information provided in the following table as required, then
press to enter the information.
NOTE
If you are operating the transceiver in a country that has stringent
licensing regulations, you may not be permitted to create channels with
transmit frequencies.
If the TxD option has been installed in the transceiver, there are
restrictions on the frequencies you can enter.
If the TxP option has been installed in the transceiver, you cannot create
channels.
NOTE If the Channel List is empty, Free Tune is displayed.
If this prompt is
displayed...
Do this...
Receive Freq • use this frequency, or
• enter a new receive frequency in kilohertz
NOTE
You can enter the frequency to three decimal
places. Press
*
to enter a decimal point, then
continue with entering the frequency.
Transmit Freq • use this frequency, or
• enter a new transmit frequency in kilohertz, or
• disable the transmit frequency by pressing
repeatedly until the setting is empty
NOTE
If the TxD option has been installed in the
transceiver, you cannot create channels with
new transmit frequencies. You can however,
create channels with the same transmit
frequency as an existing channel, and you
can disable transmit frequencies to create
receive-only channels.