Reference Manual
Table Of Contents
- Table of contents
- 1 About this manual
- 2 2110SSB Transceiver compliance
- 3 HF radio transmission
- 4 The 2110SSB Transceiver
- 5 Preparing the 2110SSB Transceiver for use
- 6 Operating the transceiver
- 7 Using lists
- 8 The Channel List
- 9 The Network List
- 10 The NETList
- 11 The Phone Link List
- 12 The Address List
- 13 Making and receiving calls
- 14 The Control List
- 15 The Keypad List
- 16 The Mode List
- 17 Using the transceiver in free tune and Amateur Mode
- 18 Hot keys
- 19 Operating the transceiver from a computer
- 20 Connectors
- 21 System messages
- 22 Accessories and hardware options
- 23 Specifications
- Index
- List of figures
- List of tables
- 1 About this manual
- 2 2110SSB Transceiver compliance
- 3 HF radio transmission
- 4 The 2110SSB Transceiver
- 5 Preparing the 2110SSB Transceiver for use
- Charging a battery
- Connecting a battery to the transceiver
- Inserting the transceiver into a backpack
- Selecting an appropriate antenna
- Troubleshooting the transceiver
- Testing the installation
- 6 Operating the transceiver
- Switching on the transceiver
- The front panel screen
- The channel screen
- Entering and editing text
- Quick Start
- Muting the transceiver
- Scanning channels
- Using the microphone
- Finding words and values
- Setting the basics
- Using hot keys
- Tuning the antenna
- Using the clarifier
- Reducing background noise with Easitalk
- Using the voice encryptor
- 7 Using lists
- The Main Menu
- Selecting a list
- The List Manager
- Setting a marker
- Setting the home screen
- Changing a setting in the Control List
- Making changes to all other lists
- Hiding and showing settings
- Grouping and ungrouping entries
- Restricting access to information
- Logging into admin level
- Displaying full and normal view
- Hiding and showing information
- Locking and unlocking information
- 8 The Channel List
- 9 The Network List
Using lists
96 2110 SSB Transceiver Reference Manual
Changing a setting in the Control List
Most of the entries in the Control List contain a single setting. The steps in this section
show you how to change these settings. The Address entry, which contains multiple
settings, is covered on page 69, Entering your station self address.
To change a setting in the Control List:
1 Press until Main Menu is displayed.
1 Scroll to Control, then press .
1 Scroll to the entry in which the setting you want to change is stored, then hold .
A question mark is displayed at the end of the heading to show that you can now edit
the setting. For example:
1 Scroll to the value you want (if it is a slider screen or a list) or enter text (for help see
page 52, Entering and editing text).
If you do not want to save the change you made and you are in a setting where you
can:
• select a value from a list or slider screen, press or PTT
• enter and delete text, hold or press PTT
The change is discarded and the setting is closed.
1 Press .
The question mark is removed.
1 Press until Main Menu is displayed.
NOTE
In the following example, you will need to log in as administrator to see
the Control List (see page 110, Logging into admin level from user level).
NOTE
Scroll to the entry or use the Find feature (for help see page 64,
Finding words and values).