Reference Manual
Table Of Contents
- Table of contents
- 1 About this manual
- 2 2110SSB Transceiver compliance
- 3 HF radio transmission
- 4 The 2110SSB Transceiver
- 5 Preparing the 2110SSB Transceiver for use
- 6 Operating the transceiver
- 7 Using lists
- 8 The Channel List
- 9 The Network List
- 10 The NETList
- 11 The Phone Link List
- 12 The Address List
- 13 Making and receiving calls
- 14 The Control List
- 15 The Keypad List
- 16 The Mode List
- 17 Using the transceiver in free tune and Amateur Mode
- 18 Hot keys
- 19 Operating the transceiver from a computer
- 20 Connectors
- 21 System messages
- 22 Accessories and hardware options
- 23 Specifications
- Index
- List of figures
- List of tables
- 1 About this manual
- 2 2110SSB Transceiver compliance
- 3 HF radio transmission
- 4 The 2110SSB Transceiver
- 5 Preparing the 2110SSB Transceiver for use
- Charging a battery
- Connecting a battery to the transceiver
- Inserting the transceiver into a backpack
- Selecting an appropriate antenna
- Troubleshooting the transceiver
- Testing the installation
- 6 Operating the transceiver
- Switching on the transceiver
- The front panel screen
- The channel screen
- Entering and editing text
- Quick Start
- Muting the transceiver
- Scanning channels
- Using the microphone
- Finding words and values
- Setting the basics
- Using hot keys
- Tuning the antenna
- Using the clarifier
- Reducing background noise with Easitalk
- Using the voice encryptor
- 7 Using lists
- The Main Menu
- Selecting a list
- The List Manager
- Setting a marker
- Setting the home screen
- Changing a setting in the Control List
- Making changes to all other lists
- Hiding and showing settings
- Grouping and ungrouping entries
- Restricting access to information
- Logging into admin level
- Displaying full and normal view
- Hiding and showing information
- Locking and unlocking information
- 8 The Channel List
- 9 The Network List
Using lists
2110 SSB Transceiver Reference Manual 95
Setting the home screen
The home screen is the screen that can be displayed quickly, regardless of the list you
happen to be in. It is displayed after you:
• switch the transceiver on
• hold from any location
The default home screen is the Channel List but almost any screen can be used as a home
screen. If you want to see the current time, make the time screen the home screen.
When you set the home screen, values are not recorded. For example, if you make the
Channel List the home screen, it displays the currently selected channel, not the channel
that was selected when you set the home screen.
Setting the home screen
To set the home screen:
1 Go to the screen you want to make the home screen.
1 Hold to open the List Manager.
1 Select Config...
1 Select Set home screen.
The home screen is set and the List Manager remains open.
Displaying the home screen
To display the home screen from any location:
1 Hold .
1 To return to the channel screen, press VIEW.
NOTE
If you want to make a screen in the Control List the home screen, you
will need to log in as administrator to see the Control List (see
page 110, Logging into admin level from user level).
NOTE
If you are editing a setting, holding will cancel your changes and
exit the setting. Holding again will display the home screen.