User Manual

MT-4E VHF & UHF Receiver & Transmitter Instruction Manual
IM08-MT-4E-TXRX Project 1106
General Information
6
FCC ID: H4JVT-4E150 (VHF) / H4JUT-4E450 (UHF)
* P25 Digital specications are applicable only for modules with the P25 Digital rmware upgrade.
PHYSICAL SPECIFICATIONS
Physical Dimensions: Width:
7.1 cm (2.8 in)
Height:
12.8 cm (5.05 in)
Depth:
19 cm (7.5 in)
Module Weight: Receiver: 1.2 kg (2.5 lbs.)
Transmitter: 1.4 kg (3.0 lbs.)
Corrosion Prevention: Anodized aluminum construction
Stainless steel hardware
Gold plated module connectors
Module Design: • Compact Eurostandard modular design.
• Plug-in modules mate with the Daniels standard MT-3 subrack.
• Subracks / modules comply with IEEE 1101, DIN 41494 and IEC 297-3
(mechanical size / modular arrangement).
External Connections: RF Connection: type N connector located on the module front panel. Digital I/O
interface is made via RJ45 modular jack located on the front panel. Programming
interface is made via mini-type B USB 1.1 jack located on the front panel. Motherboard
Connections (Audio, Power, and Control) are made through a 48 pin, gold plated,
type F connector on the rear of the module. User connection made through mated
“motherboard” assembly of the radio subrack. Type F standard connector complies
with DIN 41612 Level 2 (200 mating cycles, 4 day 10 ppm SO2 gas test with no
functional impairment and no change in contact resistance).
Handle Text Colour: Red (VHF) / Black (UHF)