Product Guide
Safety Information
10
Cascade 2019 Product Guide
CASC-2019-01
• Equipment Modication – DO NOT modify any parts on this
equipment. Contact Codan Radio Communications Service
Department.
• Radiation from Radio Frequency (RF) – DO NOT touch the
antenna when using the Transmitter. Always follow RF Safety
Guidelines.
• Exploding Hazard – DO NOT operate the Cascade equipment if
ammable gas or gas fumes are present.
• RF Burn Hazard – DO NOT touch the output connector in an open
circuit condition while transmitting. The amplier RF output connector
may produce risk of RF burns if operated with the output connector
in an open-circuit condition. The power amplier should always be
operated in the specied load and connector.
• Personal Safety – DO NOT operate or perform maintenance on the
system without direct authority from Codan Radio Communications.
Comply with all material handling regulations as many components
are heavy and moving or lifting could cause physical injury.
Some metal edges on the Cascade are sharp; wear gloves for
protection.
• Airow Restriction – DO NOT cover or restrict the cooling fans or
vents; overheating can occur and cause serious damage.
• Equipment Damage – DO NOT lift the subrack by the front panel
handles. The handles are not designed to bear the full weight of the
subrack and tted modules.
• Hot Surface Hazard – The Power Amplier surface temperature may
exceed safe touch temperatures when operated under high-power
and/or high-ambient temperature conditions.
• Shock Hazard – Protect all Cascade equipment from the possibility
of lightning strikes and contact from any unspecied external power
source.
Assembled subrack and modules weigh
over 45 pounds (~20 kilograms). A two-
person lift may be required.