User guide

Coda Audio DNC260
User Guide version 0.1 Page 8 of 30
Introduction and Key Features
Introduction
The Coda Audio DNC260 loudspeaker management system represents the current state-of-
the-art. Taking advantages of the latest advances in analogue to digital conversion and
digital signal processing technologies the units achieve performance levels that have only
recently been made possible.
The Coda Audio DNC260 System Controller is a high performance, easy to use signal
processor containing presets for all Coda Audio loudspeaker systems. The DNC260 provides
generous amounts of signal processing capability and is complemented by a highly flexible
parameter arrangement ideally suited to touring and installation applications. The DNC260
may be controlled just as comprehensively from its front panel, or by using the PodWare
software application. PodWare can operate a single DNC260, or can optionally control a
multi-km network of products using the optional C-NET network.
Key Features
• Coda Audio minimal signal path design
• Sonically superb ADC / DAC combination; a carefully matched pairing of the best
devices from Burr Brown and Wolfson
• Newly released family of Analogue Devices SHARC DSP
• Extended bandwidth; 96kHz sampling frequency provides for a nominally flat
response to 40kHz.
• Parameter knob and LCD provide a rapid, user-friendly control interface