User guide

Coda Audio DNC260
User Guide version 0.1 Page 2 of 30
Quick Reference Guide
Display
The LCD displays preset and parameter information. The default screen is shown after start
up and displays the number and name of the current preset on the lower line of text. When
navigating around the adjustable parameters, other information is shown.
Channel Select Buttons
The currently selected input or output channel is shown in the top left corner of the display.
Pressing the channel select buttons scrolls through the available inputs and outputs. If
operating stereo linked the channel pair is shown. For example ‘CH A+B’ means both input
A and B parameters.
Edit Select Buttons
The name of the edit parameter page is displayed in the bottom left portion of the LCD.
Pressing the edit select buttons moves through the available parameter pages for the
current input or output.
Parameter Knobs
Up to three parameters are shown on the display. The parameter name is shown with its’
current value below. Where appropriate, parameters are grouped according to function. For
example the parametric equalisation page shows centre frequency, width and gain. Turning
a parameter knob clockwise will increase the value of a parameter, turning anti-clockwise
will decrease it. Turning a knob rapidly will cause the action to ‘accelerate’, so the value
changes more rapidly.
Mute Buttons
The indicators next to the mute buttons indicate their current status. Pressing a mute
button toggles between the mute on and off.
Store Button
The unit has 45 preset locations. To store a preset in a location, press the store button and
use the parameter knobs to select the preset location and name the preset. Pressing the
store button again completes the task. Pressing any button other than store during the
process cancels the procedure.