User guide

Coda Audio DNC260
User Guide version 0.1 Page 17 of 30
Preset Name
Recall 32 My System
a b
c
SELECT PRESET
TO RECALL
a
RECALL RECALL
Users can develop their own Preset based on one of the Factory Presets stored within the
device. Once a Preset has been recalled, a user has complete freedom to adjust any or all
of the parameters.
Preset Store
To store the current Preset in a user location, press the Preset Store Button so the indicator
above it illuminates. Turn the first parameter knob until the required Preset location number
is show on the display. A Preset name of up to 12 characters in length can be entered using
parameter knobs B and C. Pressing the Store Button again completes the process and
stores the Preset. As with Preset Recall, pressing any other button cancels the operation.
Preset Name
Store 32 My System
a b
c
SELECT STORE
LOCATION
a
STORE STORE
cb
NAME PRESET
The user can overwrite non-protected Presets only; if an attempt is made to save a Preset
in a location already occupied by a Factory Preset a ‘LOCKED PRESET’ message is displayed.