User guide

Coda Audio DNC260
User Guide version 0.1 Page 13 of 30
Communications Port Connector
Coda Audio DNC260 series processor may be controlled entirely from another controller,
typically a Personal Computer, running an application that is compliant with the ObCom
standard. Connection will normally be made to the controller via this serial port connector.
This port is also used for updating the firmware in the unit.
Note that the communications port is NOT disabled when the front panel is made secure
using the secure button.
Rear Panel of DNC260 with C-NET
C-NET Network Port
(Only on DNC260N)
The two C-NET Network Ports can connect DNC260 to any C-NET System.
C-NET Network Port