User guide
Charnwood Dynamics Ltd. Coda cx1 User Guide – Coda Basics I - 1
CX1 USER GUIDE - COMPLETE.doc 26/04/04
24/162
CodaType=1 :
1=Cx1, 2=Mpx30
Interface=3 :
1=MiniHub+BB.RS422, 2=MiniHub+QuadUART.RS422,
3=ActiveHub(cPCI)+QuadUART
CommPacket=0x16
CommRate=11
:11=5.0M, 10=2.5M, 8=1.0M, 7=460k, 4=115.2k, 0=9600
Cameras=3
MaskType=3
:1=PseudoRandom, 2=LinearMask, 3=LinearMask Correlation
Orientation=0
:0=Horiz 1=Horiz.Inverted 2=Vert(Top=A) 3=Vert(Top=C)
DSPProgramFile=CODA\CodaSharc_V3-02.stk
[ADC_1]
:CharnDyn multi-channel ADC/Digital interface
Type=2 :
1=CharnDyn ADC-64, 2=GS-16AIO
SerialNumber=000
NumAnalogue=64
NumDigital=32
InputRange=1,2 :
0=+/-2.5V, 1=+/-5.0V, 2=+/-10.0V for each 32-channel group
[ForcePlate_1] :8-channel A/D interface
Type=12
:12=AMTI-OR6-7
Rotation=0
:0,90,180,270 degrees
MatThickness=0
:mm
CentreOffset=0,0,-6
:(x,y,z) mm from Coda Marker origin
ParameterFile=CODA\AMTI_OR6-7-4372.cal
:Parameter file, inc calibration matrix
CalFile=CODA\FP1_000.cal
:ADC channel calibration factors
DSPboard=A1:33
:A1:n = ADC_1 channel start n
BridgeVoltage=10.0
:AMTI/Bertec bridge excitation voltage (1.0 - 15.0)
AmpGain=4000,8000
:AMTI/Bertec amplifier gain (low, high)
[ForcePlate_2] :8-channel A/D interface
Type=12
:12=AMTI-OR6-7
Rotation=0
:0,90,180,270 degrees
MatThickness=0
:mm
CentreOffset=0,0,-6
:(x,y,z) mm from Coda Marker origin
ParameterFile=CODA\AMTI_OR6-7-4373.cal
:Parameter file, inc calibration matrix
CalFile=CODA\FP2_000.cal
:ADC channel calibration factors
DSPboard=A1:39
:A1:n = ADC_1 channel start n
BridgeVoltage=10.0
:AMTI/Bertec bridge excitation voltage (1.0 - 15.0)
AmpGain=4000,8000
:AMTI/Bertec amplifier gain (low, high)