User guide

Charnwood Dynamics Ltd. Coda cx1 User Guide – Reference IV-1
CX1 USER GUIDE - COMPLETE.doc 26/04/04 130/162
Edit menu
Undo
Ctrl+Z
Undo the last action [Comments View]
Cut
Ctrl+X
Cut the selection and put it on the Windows Clipboard. [Comments View]
Copy
Ctrl+C
Copy the (selected) data and put it on the Clipboard. [Comments &
Variables View]
Paste
Ctrl+V
Insert Clipboard (text) contents. [Comments View]
Copy as text...
Ctrl+C
Opens the Data Export Options dialogue in which the format of the data
output can be defined.
If a Graph View is selected, the data between the Left & Right cursors for
all the plots on the selected graph is copied to the Windows Clipboard as
tab-delimited text, where it may be pasted into another Windows application
(such as a spreadsheet).
The data is sub-sampled (and filtered) at the current cursor step period,
which is adjusted with the Cursors: Animate Faster & Slower (PgUp,
PgDown) commands. The sampling period cannot be set less than the
minimum data epoch period.
Before the data is copied to the Clipboard, a dialogue box is displayed
which confirms the time range and sampling period.
Column headings may be added optionally.
Copy Cursor Data &
Statistics…
Copies a tabulated set of cursor data values and statistics for the cursor
range for all plots of the selected graph to the Clipboard and writes to file
CursorData.txt.
Copy as picture
Copy the current Graph View to the Clipboard as a picture.
Edit data: Delete
Delete selected Marker, EMG, or Analogue (Force) data:
When a Graph View of Marker Position data is selected, the Marker data
for the selected plot is invalidated over the period between the cursors, by
marking it as out-of-view. If data interpolation is On, the invalidated data
will be interpolated from the adjacent data (using a cubic curve).
If the Graph shows EMG data or Analogue (force-plate) data, the data for
the selected plot is set to zero over the period between the cursors.
(Force vector data cannot be deleted directly - the associated (8) Analogue
data channels must be deleted individually.)
A confirmation message box is displayed before any data is deleted.
If the data is re-saved with the File: Save command, the data is
permanently deleted. Use File: Save As... to save edited data to a new
datafile.
Edit data: Interpolate
Similar to Edit data: Delete, but if the Graph shows EMG data or Analogue
(force-plate) data, the data for the selected plot is interpolated over the
period between the cursors.
Edit data: Insert
Insert Marker data during an out-of-view period.
When a Graph View of Marker Position data is selected and there is an out-
of-view period for the highlighted plot between the Left & Right cursors,
then data may be inserted in the out-of-view period by tracking another (in-
view) marker: X-Y-Z position data is inserted for the out-of-view marker to
keep the Euclidean distance between the two marker constant.
A Select Marker dialogue is opened to select the marker to track.
Edit data: Undo
Undo the last data deletion or insertion.
Only one previous edit operation can be undone.