5.5HM13950-01AProductSpecs

5
5、External & Functional Characteristics .
结构及机械性能
5-1 External
appearance
外 观
Outer dimensions to be within the tolerances specified in
the attached Drawing page 9 remarkable deformation or
superficial defects to be observed by visual check.
Fastened parts to be fixed firmly
外形尺寸符合附图 P9 外观应无明显变形或表面损
伤，紧固件应安装牢固。
5-2
Shaft end play
轴向间隙
轴向间隙
0.05-0.20 mm
5-3 Weights
重量
Approx 2Kg
5-4 Mechanical Noise
机械噪音
At rated voltage and No-load,
back ground noise:30dB max
额定电压及无负荷下测试,
背景噪音不超过 30 分贝
示意图如下：
Sponge Cushion
海绵
30cm
10cm
Microphone
麦克风
Motor
马达
55dB max
5-4 Maximum Axial
Load
最大轴向力
Direction of static load and support of load as shown
below
轴向推力和支撑位置的方向如下图
196N max
By statics load
Load
Support
the load