5.5HM13950-01AProductSpecs

3
2-5 Side Pressure
侧压
Less than 100N at a position 5mm above motor
installation surface.
出力轴端离安装表面 5mm 侧压小于 100N.
2-6 Operating Temperature Range:
使用温度范围
-10℃ - +40℃
2-7 Storage Temperature Range:
儲存温度范围
-40℃ - +80℃
3、Measuring conditions 测试条件
3-1 Motor Position
电机姿势
出力轴水平放置
3-2 Power Supply
电 源
可调节直流稳压电源，确保测量时无疑问
3-3
Environmental
Temperature and
Humidity
温度和湿度
The test is made in principle of a temperature between+10℃
to+30℃，And at relative humidity between 30% and 95%.
原则上温度为 10℃-30℃，湿度为 30-95%。
4、Electrical Characteristics 电气性能
4-1
No-load speed
空载转速
254rpm±8%
At Rated voltage and No-load
额定电压及无负载下测试
4-2
No-load current
空载电流
0.3 A max
At Rated voltage and No-load
额定电压及无负载下测试
4-3
Rated load
额定负荷
3N.m
4-4
Rated speed
额定转速
160rpm±8%
At Rated voltage and rated load
额定电压及负载下测试
4-5
Rated current
额定电流
3.3A max
At Rated voltage and rated load
额定电压及额定负载下测试
4-6
Stall current
堵转电流
12A max
At rated voltage and shaft locg
额定电压及锁定电机轴条件下测试
4-8
Terminal
resistance
电枢电阻
1.7±10%Ω
Measure between terminals
端子阻抗
4-9
Insulation
resistance
绝缘电阻
500MΩ min
DC500V between lead wire and case
在导线与机身之间加 500V 直流电压