User manual

cocos-promotions gmbh | talheimer straße 32-d | 74223 flein, germany | phone [phone] | fax [phone]-19
www.cocos-promotions.de | www.cocos-promotions.com | www.usb-sticks.de
14
6. Firmware Upgrade
The player supports Firmware Upgrade or maintenance through installing special tools on the PC.
1. Enter the main menu.
2. Push the Next-switch to select “System” Settings (SYS).
3. Press the Mode-button to enter the System Settings-menu.
4. Push the Next-switch to select Firmware Upgrade.
5. Press the Mode-button to enter the Firmware Upgrade-menu.
6. Connect the player to the PC.
7. Run the upgrading tool “MP3 Player Update” on the PC, then click on “choose firmware of new version”.
8. Choose the new firmware programme (you may find it in the accessory CD or can download it from our website).
9. Click on “Start” and the system will start the upgrade.
10. If upgrading was successful, it will be displayed.
Caution:
• Firmware upgrade is an operation to enhance and optimize the performance of the player. Even if the firmware
works without upgrading, there is no influence on the normal operation of the player.
• Incorrect operation of Firmware Upgrade may cause the player to work abnormally. Please read the manual
carefully before operation and a Firmware Upgrade should be operated by people with basic knowledge in
computer operation.
• The upgrading firmware is especially programmed for this player only and is not suitable for other players, and
another firmware is not suitable for this player.
7. Connection via USB
1. Check the USB-connector of your computer.
2. Connect MP3-player and computer with the usb-cable.
3. After connecting the two devices, press “Play” and the player will display the
connection-icon.
4. If you connect the two devices for the first time, and the included software was installed,
then your PC will automatically recognize the player. If you use the operating system
Windows 98, please install the Management Software first and then connect the player.
8. Installation of the Player Management Software
Insert the included installation CD into the CD-ROM drive and then connect the MP3-player with your computer.
The computer will indicate that a new drive was found and the driver will be installed. According to the messages,
please click “Next • Yes • Next • Next •
Finish”. Now, Management Software and driver will be automatically installed. After the installation is completed,
you will be asked to restart your computer. Please restart your computer, so that the changes can be saved.
For users with operating systems above Windows 98, the installation of the driver is not necessary.