User manual

cocos-promotions gmbh | talheimer straße 32-d | 74223 flein, germany | phone [phone] | fax [phone]-19
www.cocos-promotions.de | www.cocos-promotions.com | www.usb-sticks.de
10
• Parameter Description
Record Time Set the time and date, when the recorded files are saved
Backlight Set the time (sec.), how long the backlight should stay on without any
operation
Backlight Mode Select your desired colour
Language Select your desired language
Power Off Set a fixed time, after which the player will be turned off automatically
Replay Mode Set the working status on Replay-Mode
Contrast Set the desired contrast level of the LCD-Display
Online-Mode Function, especially created for “private space”
Memory info Shows the total memory capacity and the percentage that has been used
Firmware version Shows the firmware version
Firmware upgrade Special function for upgrading the firmware
Exit exit from the current menu
• Instructions


 “Record Time”
1. Enter the System Setting-menu (SYS).
2. Press the Mode-button to enter the Record Time-menu.
3. Press the Vol + -button to set the time in the sequence of “YY-MM-DD” (Press the Vol - -button to set the time
in the opposite sequence).
The icon of the year is blinking:
4. Push the Next/Last-switch to adjust the numbers
Here: increasing Number of the Year:
5. Press the Mode-button for confirmation and to exit the current menu.


 “Backlight” Setting
1. Go to the System Setting-menu (SYS).
2. Press the Mode-button to enter the System Setting-submenu. Push the Next-switch to go to the Backlight-
menu.
3. Press the Mode-button to enter the Backlight-Menu.
4. Push the Next/Last-switch to adjust the time.
5. Press the Mode-button for confirmation and to exit the current menu.


 “Backlight Mode”
1. Go to the System Setting-menu (SYS).
2. Press the Mode-button to enter the System Setting-submenu. Push the Next-switch to go to the Backlight
Mode-menu.
3. Press the Mode-button to enter the Backlight Mode-menu.
4. Push the Next/Last-switch to set the desired backlight colour.
5. Press the Mode-button for confirmation and to exit the current menu.
• “Language”
1. Go to the System Setting-menu (SYS).
2. Press the Mode-button to enter the System Setting-submenu. Push the Next-switch to go to the Language-
menu.
3. Press the Mode-button to enter the Language-menu.
4. Push the Next/Last-switch to select the desired language.