User`s manual

UCR-4285 UNIVERSAL REMOTE CONTROL

Transmitter: Controls your COCO receivers. Program your receivers under the same button to control

them simultaneously, or program them under various buttons to control them individually.

• For the ‘transmitter’ function this product must be used in combination with at least one COCO receiver.

The wireless system can be indefinitely expanded with other COCO remote controls and/or receivers.

• The standard setting for the ‘lighting mode’ is COCO house code ‘A’. If the receivers are already set to

a different house code, you can change the house code of the UCR-4285 or change your receivers to

house code A. Follow steps [5-7] to change the house code of the UCR-4285. Use the device button

with the light bulb icon and the desired code from table I below.

• In table II below, you can see which buttons on the UCR-4285 match the number codes of your COCO

receivers. The UCR-4285 can use a maximum of 14 different number codes.

Table I Table II

House

code

receiver

Code

UCR-4285

Number

code

receiver

Button

UCR-4285

A 41000 1 1

B 41001 2 2

C 41002 3 3

D 41003 4 4

E 41004 5 5

F 41005 6 6

G 41006 7 7

H 41007 8 8

I 41008 9 9

J 41009 10 0

K 41010 11 red

L 41011 12 green

M 41012 13 yellow

N 41013 14 blue

O 41014 15 -

P 41015 16 -