User`s manual

UCR-4285 UNIVERSAL REMOTE CONTROL
Extra functions
Teletext
If your TV is suitable for teletext, you can use several buttons to control the basic functions:
On: Activate Teletext.
Off: Switch off Teletext.
Zoom in: Show the upper half of the page. Press again to see the lower half. Press again to return to
normal format, or (depending on the TV) press the button.
Pause/Stop: Hold the page.
Mix: Shows both Teletext and the normal TV picture. Also use this button for subtitles. On some TVs
the Mix function is activated by pressing the button.
Volume ‘push-through’
• With this function you can adjust the volume of a device (such as your TV) while the UCR-4285 is set to
control another device (e.g. ‘SAT’ mode).
• Activating the push-through function (example: adjusting the TV volume in ‘SAT’ mode):
1- Press ‘SAT’ to select the mode in which you want to control the volume of the TV.
2 Press and simultaneously. Do not release them until the indicator has flashed several times to
confirm.
3- Press ‘9 9 3’. The indicator flashes several times.
4- Press ‘TV’. The indicator flashes several times.
• Cancelling the push-through function:
1 Press and simultaneously. Do not release them until the indicator has flashed several times to
confirm.
2- Press ‘9 9 3’. The indicator flashes several times.
3- Press ‘Vol +’. The indicator flashes several times.
Macros
• This function allows you to execute a series of commands with just the press of a button, while you
would normally have to press several buttons.
11