User`s manual

SUN-500 CURTAIN/SUN BLIND SWITCH
B +
A +
Motor
24V
24V -
24V +
230V
Neutral
F1
F2
Earth yellow/green
230V blue
230V brown
Motor
230V
[5A] 230 V motors. The motor has 4 wires: earth
(yellow/green), neutral (blue) and 2 hot wires: F1
(brown) and F2 (black). The position of F1 and F2
determines whether the blind is raised or lowered
when the ON and OFF buttons are pressed on the
COCO transmitter. These two terminals can be
interchanged without causing any problem.
[5B] Low-voltage motors (e.g. 24 V). The position
of “A+” and “B+” can be interchanged without
causing any problem.
The L and N terminals must never make
contact with the low-voltage wires! This can lead to
dangerous situations and damage to the
equipment!
5