User`s manual

SUN-500 CURTAIN/SUN BLIND SWITCH
[3] If applicable: remove the existing unit with
which you have controlled your rolling shutters,
sun blind, curtains etc. in the past.
[4] Connect 230 V mains power to the product: (1)
Connect the (brown) “hot wire” to terminal “L”, and
(2) connect the (blue) “neutral wire” to terminal “N”.
Tighten the clamping screws.
The 230 V mains power must always be
connected in the manner described above!
Your wire colours may be different! If in doubt,
ask your installer!
If an existing switch is replaced by the SUN-
500, it can no longer be used!
3