User's Guide

After surgery

Cleaning the remote assistant

To keep the remote assistant clean, wipe it with a soft dry cloth. Do

not use alcohol, household cleaners or abrasive materials to clean the

remote assistant.

If the remote assistant gets wet:

1. Turn it off

2. Wipe it with a soft dry cloth

3. Leave out to dry for approximately 12 hours.

4. Turn it on again after it is dry. If the remote assistant no longer

functions, return it to your Cochlear representative. Cochlear cannot

guarantee that it can repair a water-damaged remote assistant.

Do not use an oven or microwave or any other electrical or

heating device to dry the remote assistant.

Uploading results to ﬁ tting software

You will need to upload the results from the remote assistant to the

cochlear implant ﬁ tting software (CustomSound or NFS). Refer to the

user guide for your ﬁ tting software for full instructions.

Using the remote assistant Using the remote assistant