Nucleus® CR210 Remote Control User Guide
Contents Symbols About ...............................................................................................................................4 Turn on.............................................................................................................................6 Note Important information or advice. Can save inconvenience. Warning (harmful) Potential safety hazards and serious adverse reactions. Could cause harm to person. Tip Time saving hint or saves inconvenience.
About Volume/sensitivity label Program number Volume/sensitivity Telecoil level About Cochlear Nucleus CR210 Remote Control The Cochlear Nucleus CR210 Remote Control is a simple hand-held controller for your Cochlear Nucleus CP900 Series Sound Processors. The remote allows you to: 1. change programs Program label 2. turn volume or sensitivity up and down 3. turn the telecoil on and off 4. turn auto telecoil on and off Auto Telecoil 5.
Turn On Pair Your clinician may have already paired your remote with your sound processor. If not, you will need to pair it the first time you use it. Turn on Turn on and off Slide the switch up to turn on. When the switch is in the up position, the display will "go to sleep" when not in use. Press any button on the keypad to "wake" it again. If your remote is not paired to any processor, the screen appears as above and the display "blinks" when you press keys.
Turn On Use 3 The screen will show pairing in progress. Change programs Your clinician may program your sound processor with up to four programs to control with your remote. 4 The screen then shows successful pairing of left (L) or right (R) processor. 5 Bilateral users only - repeat step 2 for your second sound processor.
Talk on the phone Change volume or sensitivity Usually, your clinician will set up your remote control to control the volume of the sound you hear. But your clinician can instead set it up to control sensitivity. "Sensitivity" describes the range of sounds you hear e.g. soft, background, close or far away. Your sound processor's telecoil (t-switch) lets you listen to hearing loops and hear voices on the telephone more clearly. You can control it with the telecoil button on your sound processor.
Battery 3. Telecoil AND auto telecoil function - you will be able to to turn both the telecoil and the auto telecoil feature on and off with the remote as needed. When auto telecoil is left on, the telecoil in your sound processor turns on automatically whenever a hearing loop or phone is in range, and turns off a few seconds after you move the processor away from the source.
Care Final render to reinforce plus side up Every day 3 Insert the new battery. Make sure the plus sign "+" is facing up. 4 Replace the battery cover bottom edge first and turn the screw clockwise to lock the cover in place. To keep your remote control clean, wipe its display and buttons with a soft dry cloth. Keep your remote dry. If it ever gets wet: Insert shot of drying with a soft cloth Remove the battery immediately. Dry it with a soft dry cloth.
Other information Other information General warnings and cautions • Use a soft dry cloth ONLY to clean the surface of your remote control. • Do not use alcohol, household cleaners or abrasive materials to clean your remote control. • Do not use the Zephyr dry aid kit or any household appliance to dry your remote control. • Do not bend or compress the display on your remote control. The remote control wireless communication link operates in the 2.
Other information Certification and applied standards Dimensions Length Width Height The CR210 Remote Control fulfils the essential requirements listed in Annex 1 of the EC directive 90/385/EEC on Active Implantable Medical Devices as last amended by EC Directive 2007/47/EEC. 66 mm 36 mm 10.5 mm Equipment classification Weight The remote control with battery in place weighs approximately 35 g.
Legal statement The statements made in this guide are believed to be true and correct as of the date of publication. However, specifications are subject to change without notice. Labelling symbols Nucleus® cochlear implant systems are covered by one or more international patents.
Cochlear Ltd (ABN 96 002 618 073) 14 Mars Road, Lane Cove NSW 2066, Australia Tel: 61 2 9428 6555 Fax: 61 2 9428 6352 Cochlear Americas 13059 E Peakview Avenue, Centennial, CO 80111, USA Tel: 1 303 790 9010 Fax: 1 303 792 9025 Cochlear AG European Headquarters, Peter Merian-Weg 4, CH - 4052 Basel, Switzerland Tel: 41 61 205 0404 Fax: 41 61 205 0405 Cochlear Deutschland GmbH & Co.
