User's Guide

Cochlear Limited 201150 323649 Iss 3 CP900 Series Sound Processors | User guides
Care
CP900 Series Sound Processors | User guides 51Cochlear Limited 2011
Care for your acoustic component
The acoustic component accessory is used only by people who are set up to use
their processor in Hybrid mode.
If you use Power or Plus domes:
Every day:
 Check the wax fi lter in the receiver and change it whenever it is clogged with
wax or the system does not sound normal.
 Domes have an additional inbuilt fi lter. Check the inbuilt fi lter and change
the dome whenever it is clogged with wax, or whenever the dome is dirty,
discoloured or losing shape.
If you use Power or Micro moulds:
Every day:
 Clean the earmould and receiver cable with the supplied brush, a soft dry
cloth or our recommended cleaning fl uids, Hadeo™ and Cedis® ONLY. Wipe
any traces of wax away from the opening of the vent.
 Check if the vent is clogged, and use the supplied vent cleaner to remove
wax as needed. Do NOT use the vent cleaner to clean any other part of the
system.
 Check the wax fi lter and change whenever it is clogged with wax or the
system does not sound normal.
Caution
Handle your sound processor and acoustic component with care
above fl at surfaces. Never drop them or twist the receiver cable.

Note
Micro moulds can use WaxStop fi lters ONLY. Power moulds can use
either NoWax or WaxStop fi lters.
Pull the dome off using your
fi ngernails if necessary and discard.
Push the new dome directly onto
the receiver.
Click it securely into place.
1
2
3
Replace Power domes
4
When fi tting a Plus dome, the outer
sleeve should face down.
Replace Plus domes
Follow the directions for replacing Power domes and add the following step: