User's Guide

Cochlear Limited 201148 323649 Iss 3 CP900 Series Sound Processors | User guides
Care
CP900 Series Sound Processors | User guides 49Cochlear Limited 2011
Change the coil cable
The Cochlear Nucleus CP900 Series Coil Cable come in four lengths so you
can choose the most comfortable fi t. Only remove the coil cable when you are
changing it.
Hold the cable grip as shown
and fi rmly pull it straight out of
the processor. Do not tug on the
fl exible part of the cable.
Use your fi ngernails to hold the
cable grip as shown and pull the
cable fi rmly off the coil. Do not tug
on the fl exible part of the cable.
Push the new coil cable into the
processor until it clicks into place.
1
2
3
Push the new coil cable into the coil
until it clicks into place.
4
Change the coil magnet
The strength of the Cochlear Nucleus CP900 Series Coil Magnet can be adjusted
by changing the magnet depth or by replacing with a magnet of a different
strength. If the magnet is too weak or strong the coil may fall off or cause
discomfort.
To change the strength of the magnet:
To change the coil magnet:
With fi nger grips facing up, unscrew
the magnet anticlockwise and
remove.
With fi nger grips facing up, turn the
magnet clockwise to increase the
magnet's strength.
Insert the new magnet into the coil
hole and turn it clockwise until it is
at a comfortable depth.
Turn the magnet anticlockwise to
reduce its strength.
1
1
2
2