User's Guide

Cochlear Limited 201146 323649 Iss 3 CP900 Series Sound Processors | User guides
Care
CP900 Series Sound Processors | User guides 47Cochlear Limited 2011
Flip the tool and use the pointed
end to push the pin fully into
the earhook. The pin should not
protrude from either side of
the earhook.
Partly insert the fi tting pin into
the hole on the earhook.
3
4
Attach the tamper resistant earhook
Click the tamper resistant
earhook onto the processor.
Make sure the hole on the
earhook is aligned with the hole
on the processing unit.
Insert a fi tting pin into the hole
on the blunt end of the locking
tool.
1
2

Childproofing Tip
Remove the tamper resistant earhook
Hold the processor as shown
and insert the pointed end of
the locking tool into the hole
on the earhook.
Push the tool into the hole to
partly remove the fi tting pin. Be
gentle as too much force may
damage the tool.
Press fi rmly on the top of the
earhook with your thumb and
click it off the sound processor
1
2
4
Lift out the earhook fi tting pin
with tweezers.
3

Childproofing Tip