User's Guide

Cochlear Limited 2011
28 323649 Iss 3 CP900 Series Sound Processors | User guides
Wear

CP900 Series Sound Processors | User guides 29Cochlear Limited 2011
Wear an acoustic component
If your sound processor is set up for use in Hybrid mode, you can wear it with an
acoustic component.
Remove your acoustic component
Wear your processor without the acoustic component by replacing it with a
standard earhook:
Hold the coil in one hand and place
the processor on your ear with the
other.
Insert your Cochlear screwdriver
into the opening under the earhook
to unlatch the receiver cable.
Place the coil on your head.
1
2
2
Place your dome or earmould in
your ear as instructed by your
clinician.
3
Remove the battery module from
the processing unit by twisting the
two parts as shown.
1
Press fi rmly on top of the earhook
with your thumb to click it off the
sound processor.
Click the standard earhook into
place.
5
6
Carefully push and twist the
screwdriver until the receiver cable
disconnects.
3
Re-attach the battery module.
4
Caution
Use only the Hybrid screwdriver – not the CP800 screwdriver – to
remove the acoustic component.