User's Manual

Change the cover

To remove the cover:

1. Open the battery door. (A)

2. Press and lift to remove the cover. (B)

To attach the cover:

1. Place the cover over the front part of the sound processor base

unit. The button should be aligned with the cover opening.

2. Press down on the cover around the button until you feel

a “click” on both sides of the button. (A)

3. Press down on the cover between microphone ports until

you feel a “click”. (B)

4. Close the battery door. (C)

Change the battery door

1. Open the battery door (A)

2. Pull the door out of its hinge (B)

3. Replace the door. Be sure to align the hinge clip to the metal

pin on the processor (C)

4. Close the battery door (D)

A B