User's Manual

14
Attach a Safety Line
To reduce the risk of losing your processor, you can attach a Safety
Line that clips onto your clothing or hair:
1.
A B
Pinch the loop on the end of the line between
your finger and thumb. (A)
2. Pass the loop through the attachment hole
in the sound processor from front to back. (B)
3. Pass the clip through the loop and pull the line tight. (B)
4. Attach the clip to your clothing or hair depending
on the Safety Line design.
NOTE
If you have trouble attaching the safety line, you can remove
the sound processor cover (page 17).
To attach the Safety Line to your clothes
use the clip shown below.
1. Lift the tab to open the clip. (A)
2. Place the clip on your clothing and press down to close. (B)
3. Place the sound processor on your implant.
A B