User's Manual

13
Attach a Cochlear SoftWear
™
Pad
The Cochlear SoftWear Pad is optional. If you experience
discomfort when wearing your processor, you can attach this
adhesive pad to the back of your processor.
NOTE
You may need a stronger magnet and new feedback calibration
measurement after attaching the Cochlear SoftWear Pad.
Please contact your hearing care professional if you experience
poor sound or magnet retention.
WARNING
If you experience tightness or pain at the implant site, or develop
significant skin irritation, stop using your sound processor and
contact your hearing care professional.
1. Remove any old pad from the processor
2. Peel off the single backing strip on the adhesive side
of the pad. (A).
3. Attach the pad to the back of the processor
– press down firmly (B, C)
4. Peel off the two semicircle backing covers
on the cushion side of the pad. (D)
5. Wear your processor as usual.
DA CB