Daim Ntawv Qhia Tus Neeg Siv

ManualsBrandsCochlear ManualsNucleus SmartCochlear Nucleus Ntse App

Pair your processor(s)

Note

• If you have other sound processor(s) already paired, you need to unpair them ﬁrst. See page 4

for unpairing instructions.

• Radio interference: when trying to pair or connect your sound processor with the app, you may experience interference from some devices

(e.g. microwave ovens, wireless routers or TV Streamers). If this happens, move away from the device and try again.

Have your processor(s)

ready.

Switch on Bluetooth on your

Android smartphone.

Run

Nucleus Smart App.

Swipe through the

Welcome

screens.

Create your Cochlear

Account

The

Pair your processor(s)

screen displays.

Tap Continue.

In the

Location popup, tap

OK.

In the

Allow Nucleus Smart

popup, tap ALLOW.

This guide tells you how to pair your Cochlear

™

Nucleus

8, Nucleus 7, Nucleus 7 SE, Nucleus 7 S or Kanso

2 Sound Processor

with

the Nucleus Smart App on a compatible Android smartphone

†

, so you can use the app to control and monitor your sound processor(s).

Note

• To use the Android version of the app, your sound processor must have the latest ﬁrmware installed. Please check with your clinician.

• Some screens will show your name and sound processor model. Images shown in this guide are of example screens only and may differ to what

you see in your app. Use the instructions in this guide in conjunction with the corresponding screens in the app itself to guide you through using

the app.

* Not all products are available in all countries.

† For compatibility information, visit www.cochlear.com/compatibility

...CONTINUED OVER THE PAGE...

Cochlear

™

Pairing Guide

(for Android

™

)

Summary of content (5 pages)

PAGE 1
Cochlear™ Pairing Guide (for Android™) This guide tells you how to pair your Cochlear™ Nucleus® 8, Nucleus 7, Nucleus 7 SE, Nucleus 7 S or Kanso® 2 Sound Processor* with the Nucleus Smart App on a compatible Android smartphone†, so you can use the app to control and monitor your sound processor(s). Note • To use the Android version of the app, your sound processor must have the latest firmware installed. Please check with your clinician. • Some screens will show your name and sound processor model.
PAGE 2
9 The Detect your processor(s) screen displays. Turn your sound processor(s) OFF, then ON. If you have two do both, one after the other. After turning your processor(s) off and on, tap Continue. 12 Follow the screen prompts to Verify your sound processor(s). The Preparing your Processor(s) screen displays for up to 60 seconds. Tap Continue. 10 When your processor(s) display, tap once to start pairing. 13 Tap an option in the Sound Processor(s) screen.
PAGE 3
Smartphones with audio streaming for hearing aids If your smartphone supports audio streaming for hearing aids, you can receive sound from your phone straight to your processor. To setup audio streaming: 1 When the Audio streaming screen displays, tap Enable. Your sound processor(s) will turn off for a few moments. 4 If you have system sounds enabled on your smartphone, the System sounds screen displays.
PAGE 4
Unpair your processor(s) If you change your sound processor(s), for example if you receive a new sound processor from the repair centre, you need to: • Unpair the old sound processor(s), then • Pair the new sound processor(s). To unpair your processors(s): 1 Open the app’s Menu. 2 Tap Settings. 3 Tap Processor settings. 4 Tap Unpair your processor(s). 5 Tap YES. A. Tap YES and follow the prompts to Forget your processor(s). B. Tap the back button to return to the Nucleus Smart App.
PAGE 5
Check audio streaming status To check your audio streaming status: 1 Open the app’s Menu. 2 Tap Settings. 3 Tap Audio streaming. 4 If streaming is not active, for more details read the information on screen and tap available links. Disable audio streaming To disable audio streaming: 1 Open the app’s Menu. 2 Tap Settings. 3 Tap Audio streaming. 4 If streaming is enabled, follow the instructions to disable audio streaming. • For more information on the app, refer to the Nucleus Smart App User Guide.