Troubleshooting guide

Troubleshooting Guide
Freedom
™
BTE, Mini
™
BTE
and Babyworn
™
BTE
Sound Processor
Troubleshooting Kit Contents
•
675 PowerOne HP, zinc air batteries, 6 pack
•
Freedom coil (8cm)
•
Freedom magnet - #2 beige
•
Freedom lapel microphone
•
Freedom monitor earphones
•
Freedom earhook set (small and large)
•
Freedom microphone protector
•
Freedom battery holder
Before troubleshooting step-by-step, conduct
a maintenance check of the equipment.
Maintenance Check
Confirm:
•
Transmitting cable is properly connected.
•
Cable is not broken or cracked.
•
Transmitting coil is on the child’s head.
Also do the following:
•
Confirm that the Freedom BTE is ‘ON’.
•
If no sound, turn the Freedom BTE ‘Off ’ for about 3 sec. and then ‘On’.
•
Confirm that the child is using the recommended program setting.
•
Identify whether help messages are displayed on the LCD.
Select
button
on/off
Increase
button
Cover for
accessories
connection
Display
Decrease
button
Sample setting shown here:
Program 3 in use
Microphone only
Program 2 in use
Telecoil only
19
18
Each of the pieces pictured here is an important part comprising the external
components of the Mini
™
BTE sound processor.
Each of the pieces pictured here is an important part comprising the external
components of the Babyworn
™
BTE sound processor.
Select
Display
Increase/Decrease
Controller panel
Processing unit
Case
BTE Controller
*
(3ZA)
Accessory
Connection
Processing Unit
Shoe/Cable
Clip Retention Option
*
Not compatible with Mini
™
controller or MicroLink
™
Freedom
™
Mini BTE
Battery holder