User guide
A
N EDUCATOR’S GUIDE
•
65
Using accessories and ALDs
with ESPrit 3G sound
processor
(for Nucleus 22 and Nucleus 24 cochlear
implant systems)
The Accessories Adapter must be connected to
ESPrit 3G sound processor.
• Remove the socket cover on the bottom of
ESPrit 3G
• Connect the accessories adapter to the
accessories port
The following accessories can be connected
directl
y to the L shaped connector on the
accessories adapter
• ESPrit Lapel Microphone
• Accessory Adapter Cable
• ESPrit Cordless Telecoil
• ESPrit Telecoil (with cable)
Locate the round pin connector on one side of
the accessories adapter (see illustration below).
This is the socket for connection of the ESPrit 3G
monitoring earphones. The earphones are used to
check the function of the processor microphone or
accessories lik
e an FM receiver when used with
individuals who are unable to pro
vide feedback.
*When using the above accessories connected to the L shaped
connector on the accessories adapter, the processor microphone is
disabled (non-mixing).
Always turn ESPrit 3G off before connecting acces-
sories directly to the processor or the Accessory
Adapter
.
Then tur
n the processor back on.
Personal Audio Cable
Lapel MicrophoneMonitor Earphones
TV HiFi Cable
Plug for your ESPrit 3G
Socket for your
monitoring earphones
“0” f
or
Turn off
Socket for your accessories or
wired assistive listening devices