User's Guide

10 NUCLEUS
®
7 REMOTE CONTROL USER GUIDE
Wireless communication link
The remote control wireless communication link operates in
the 2.4 GHz ISM band using GFSK (Gaussian frequency-shift
keying) on 4 channels. The link uses a proprietary bidirectional
communication protocol and operates over a distance of up
to 2 metres from the processor. The wireless communication
link continuously switches between the 4 channels to avoid
interference on any specific channel. The remote control
indicates via its display when the processor is out of operating
distance (or switched off) or when the link is interrupted due
to broad spectrum interference (see page 7).
Environmental protection
Your remote control contains electronic components subject
to the Directive 2002/96/EC on waste electrical and
electronic equipment.
Help protect the environment by not disposing of your
remote control or batteries with your unsorted household
waste. Please recycle your remote control and batteries
according to your local regulations.
DRAFT ONLY FOR USABILITY TESTING