User's Manual

The pairing animation screen displays.
Figure 29: Remote assistant pairing animation screen
Turn on the processor while this screen is displayed.3.
On successful pairing, you will see this screen:
Pair 2
nd
Unpair
Figure 30: Remote assistant is successfully paired with the processor
A green tick next to the processor icon indicates that the remote
assistant has been successfully paired with the processor. If your
processor is on the left side, a blue processor icon displays. If your
processor is on the right side, a red processor icon displays.
If needed, you can pair your second processor with your remote
assistant.
Pairing your remote assistant with your second processor
To pair your remote assistant with your second processor:
Turn off the second processor.1.
Press the lower right soft key (Pair 2nd) to pair the second 2.
processor.
© Cochlear Limited 2009 CR110 User Guide - 31
Using your remote assistant
195993 Iss3 CR110 user guide 01.nu.indd 31 13/05/2009 5:12:24 PM