User's Manual

You need to pair your remote assistant if:
Your remote assistant is not already paired with your processor.•
You have received a new processor.•
You have received a second processor (bilateral user).•
You have received a new remote assistant.•
You have unpaired your remote assistant from your processor.•
Your remote assistant or processor fi rmware version has been •
updated.
If your remote assistant is not paired with your processor, you see the
following screen on your remote assistant display.
Pair
Figure 27: Remote assistant needs to be paired with the processor
Pairing your remote assistant with one processor
To pair the remote assistant with your fi rst (or only) processor:
Turn off the processor.1.
Press the lower right soft key (Pair) on the remote assistant to 2.
begin pairing.
Pair
Figure 28: Pair screen
30 - CR110 User Guide © Cochlear Limited 2009
Using your remote assistant
195993 Iss3 CR110 user guide 01.nu.indd 30 13/05/2009 5:12:24 PM