User's Manual

Personalising settings
You can use your remote assistant to personalise your processor
settings (e.g. change the processor microphone direction) to suit your
listening needs. You can change the processor settings only when the
processor is turned on and within operating distance. If the remote
assistant is paired with two processors, both processors need to be
turned on and within operating distance.
You can also personalise your remote assistant settings (e.g. change the
brightness of the remote assistant display).
If you accidentally change a processor setting, or you wish to return
to the default settings, you can easily reset processor and program
settings to the values set by your clinician. You can also reset remote
assistant settings to the default settings.
To personalise your processor or remote assistant settings:
Turn on your processor and ensure that it is within operating 1.
distance.
From the Home screen, press the Cochlear key.2.
To select the processor settings menu, press the upper left soft 3.
key. To select the remote assistant settings menu, press the upper
right soft key.
Figure 42: Processor settings menu (1) and remote assistant settings menu (2)
To select the processor or remote assistant setting you wish to 4.
change, press the lower directional key until the desired settings
screen displays.
Processor settings that you change apply to all programs, regardless of
the program that is selected. When the remote assistant is paired with
two processors, all processor settings apply to both processors.
2
1
© Cochlear Limited 2009 CR110 User Guide - 39
195993 Iss3 CR110 user guide 01.nu.indd 39 13/05/2009 5:12:33 PM