User's Manual

Using your remote assistant to
troubleshoot your processor
The following features on your remote assistant can help you
troubleshoot your processor:
Visual alerts that appear on your remote assistant display.•
Figure 81: Coil off visual alert
Your processor status indicator.•
The processor troubleshooting guide on your remote assistant.•
For information on how to troubleshoot your processor, refer to
the CP810 and CR110 Troubleshooting Guide provided with your
processor documentation.
Checking your processor coil
Your remote assistant has an in-built coil sensor that allows you to
check if the coil connected to your processor is receiving sound signals
from your processor.
To check the coil using the coil sensor:
Remove the coil from the head. Do not use the coil sensor when 1.
the coil is on the head.
Place the coil on the coil sensor guides on the back of your 2.
remote assistant. The coil sensor guides are located on the
sides of the product information label. Make sure that the coil is
properly aligned with the coil sensor guides.
© Cochlear Limited 2009 CR110 User Guide - 63
195993 Iss3 CR110 user guide 01.nu.indd 63 13/05/2009 5:13:24 PM