User's Manual

Thread the lanyard as shown below:
Hold the remote assistant in 1.
one hand.
Insert the lanyard loop 2.
through the bottom hole
with the thumb and index
fi nger of the other hand.
Insert the lanyard strap 3.
through the lanyard loop as
shown.
Pull the lanyard strap 4.
upwards until the loop
tightens into a knot.
Protecting your remote assistant from water
damage
Your remote assistant is protected against access of solid foreign objects
greater than or equal to 1.0 mm diameter, and failure from splashing
water (IP44 rating).
© Cochlear Limited 2009 CR110 User Guide - 59
Caring for your remote assistant
195993 Iss3 CR110 user guide 01.nu.indd 59 13/05/2009 5:12:55 PM