User's Manual

Dual control mode
When you pair two processors, your remote assistant is automatically
in dual control mode.
In dual control mode, you can control both processors at the same
time to:
Change programs.•
Change volume or sensitivity.•
Turn on the telecoil or Auto Telecoil.•
Connect an audio accessory.•
To change these settings, both processors must be on and your remote
assistant must be within operating distance of your processors.
Changes to processor settings (e.g. microphone direction) affect both
processors, regardless of the control mode.
Right or left control modes
Sometimes you may want to change a setting on one processor only.
For example:
Turn on the telecoil or Auto Telecoil on the left processor only.•
Change the volume or sensitivity on the right processor only.•
Switching between control modes
To switch between control modes, press and hold the left or right
directional key.
Noise
Music
Focus
Everyday Noise
Music
Focus
Everyday
Figure 71: Switching from dual control mode to left control mode
© Cochlear Limited 2009 CR110 User Guide - 53
Bilateral control
195993 Iss3 CR110 user guide 01.nu.indd 53 13/05/2009 5:12:37 PM