User's Manual

To increase the speaker volume, press the lower right soft key. To 2.

decrease the volume, press the lower left soft key.

Figure 60: Remote assistant speaker volume screen

Enabling and disabling audio and visual alerts

When your remote assistant visual alerts are enabled, an alert pops up

on your remote assistant display when there is a problem (e.g. when the

coil is off). You will also hear a sound.

If your remote assistant alerts are disabled, you will only see visual alerts

when you enter the processor status screen. To save battery power,

there are no visual alerts when your remote assistant is in standby

mode.

The orange indicator light will ﬂ ash when there is a problem, even if

visual alerts are disabled.

To enable or disable your remote assistant audio and visual alerts:

Select the remote assistant audio and visual alerts screen from the 1.

remote assistant settings menu.

To enable or disable audio and visual alerts, press the lower right 2.

soft key.

Disable

Figure 61: Remote assistant visual alerts

and sounds enabled

Enable

Figure 62: Remote assistant visual alerts

and sounds disabled

Personalising settings

195993 Iss3 CR110 user guide 01.nu.indd 48 13/05/2009 5:12:35 PM