User's Manual

28 KANSO
™
SOUND PROCESSOR
DRAFT ONLY FOR CLINICAL TESTING
Step 2: Insert new microphone protectors
1. Pull the Kanso Microphone Protector Applicator out of its
sleeve.
2. With the microphone
protectors facing down, lay
the applicator over the
processor, with protectors
over the microphones.
3. Press the microphone
protectors down with your
finger.
4. Remove the applicator
carefully, peeling it upwards
from the side.
5. Replace the front cover.
6. Replace the battery cover. Lock the cover if required.