User's Manual

18 KANSO
™
SOUND PROCESSOR
DRAFT ONLY FOR CLINICAL TESTING
Change the magnet
If your sound processor’s magnet is too weak the processor
may fall off, or if it is too strong it may cause discomfort.
You can adjust the magnet strength by replacing it with a
magnet of a different strength from ½ (weakest) to
6 (strongest).
1. If the battery cover is locked, turn the lock screw
anticlockwise to unlock it.
2. Remove the battery cover.
Use your fingers on the sides to pull off the cover.
3. Use your thumbnail to
remove the magnet cover.
4. Press down with your finger
and turn the magnet
anticlockwise until the arrow
and side tabs line up with the
square notches in the
processor case.