User's Manual

To change the coil cable to a longer or shorter one, do the following:
Remove the coil cable from the processing unit as shown.
Place the thumb and index 1.
fi nger over the fi nger grips
on the processor end
of the coil cable plug as
shown.
Gently pull the coil cable 2.
plug away from the
processor.
You may damage the coil cable, coil cable plug or the processing unit if
you pull on the cable, or twist the cable plug.
Remove the coil cable from the coil as shown.
Hold the coil fi rmly in one 1.
hand as shown.
Place the thumb and index 2.
fi nger of the other hand
over the fi nger grips on the
coil end of the coil cable
plug.
Firmly pull the coil cable 3.
away from the coil.
© Cochlear Limited 2009 CP810 Sound Processor User Guide - 21
Wearing your processor
195992 Iss3 CP810 user guide 01.indd 21 13/05/2009 4:23:50 PM