User's Manual

Hold the new magnet 3.
between the thumb and
index fi nger as shown.
Hold the coil in the other 4.
hand.
Insert the magnet gently 5.
into the magnet slot on the
topside of the coil. The side
with the star should face
upwards. The magnet fi ts
easily.
Turn the magnet in a clockwise direction until it is in position. 6.
Do not overtighten the magnet, or force it to turn if it becomes diffi cult
to turn during insertion or removal. The movement should be smooth
and turning should need only a small amount of force. If turning
becomes diffi cult, check that:
The magnet is correctly aligned in the coil.•
You are turning the magnet in the correct direction.•
Changing the coil cable
If you fi nd that the coil cable is too long or short for your comfort, you
can change the coil cable. Regularly check to see if the coil cable is
damaged. If damaged, you will need a new coil cable.
20 - CP810 Sound Processor User Guide © Cochlear Limited 2009
Wearing your processor
195992 Iss3 CP810 user guide 01.indd 20 13/05/2009 4:23:46 PM