User's Manual

Changing the earhook
Earhooks are available in different sizes. If your earhook becomes loose,
you should replace it.
To change the earhook:
Hold your processor and 1.
the earhook as shown.
Rotate the earhook to pull 2.
it away from the processing
unit.
•
Hold the new earhook 3.
in one hand and your
processor in the other hand
as shown.
Attach the earhook by 4.
pushing the lower end of the
earhook onto the processing
unit.
Avoid twisting the earhook as it may become loose.
Adjusting and replacing the coil magnet
If the magnet strength is too weak, the coil may fall off. If it is too
strong, it may cause discomfort or skin irritation. You may consult your
clinician if you are unsure about correct magnet strength.
Make sure the coil is positioned correctly against the implant by placing
it where the coil magnet “pull” feels the strongest. You can change how
fi rmly the magnet sits on your head by adjusting its depth in the coil.
18 - CP810 Sound Processor User Guide © Cochlear Limited 2009
Wearing your processor
195992 Iss3 CP810 user guide 01.indd 18 13/05/2009 4:23:34 PM