User's Manual

Attaching the coil and coil cable
If the coil is not attached to the processing unit, or the coil cable is
not attached to the coil, you need to attach them before placing the
processor on your ear.
Attaching the coil cable to the coil
To attach the coil cable to the coil:
H old the coil in one hand 1.
and the coil cable plug in the
other hand as shown.
Align the coil end of the coil 2.
cable plug with the coil.
Push the coil cable plug 3.
fi rmly into the coil until it
clicks into place.
Attaching the coil to the processing unit
To attach the coil to the processing unit:
Align the coil cable plug with 1.
the coil cable socket on the
processing unit.
Push the coil cable plug 2.
fi rmly into the socket until it
clicks into place.
16 - CP810 Sound Processor User Guide © Cochlear Limited 2009
Wearing your processor
195992 Iss3 CP810 user guide 01.indd 16 13/05/2009 4:23:22 PM