User's Manual

The Standard Battery Module consists of a battery holder and a battery

cover.

Figure 4: Battery holder with zinc air batteries (1), tamper resistant battery cover (2)

and battery lock (3)

To prevent children from detaching the battery cover from the battery

holder, you can use the Cochlear

™

Nucleus

CP800 Series Tamper

Resistant Battery Cover. You can also lock the standard battery module

or the rechargeable battery module to the processing unit.

Cochlear supplies a battery charger to recharge the rechargeable battery

module. For more information, see Replacing and recharging batteries.

Coil and coil cable

The coil is a small round disk that you place over the implant. It

transfers electromagnetic signals from your processing unit to the

implant. The coil is attached to a removable coil cable, which plugs into

the processing unit. The coil and coil cable are available in a choice of

colours and lengths. For more information, see Changing the coil cable.

Figure 5: Coil only (1) and coil with cable (2)

Getting to know your processor

195992 Iss3 CP810 user guide 01.indd 11 13/05/2009 4:23:13 PM