User's Manual

To change the current program:

If the processor is turned off, turn it on.1.

Press the lower button until the program changes to the one you 2.

want.

Each successive button press changes the program to the next one (e.g.

to change from program 1 to program 2, press once). The number of

green light ﬂ ashes you see corresponds to the number of the selected

program (e.g. after you change from program 1 to program 2, you see

two short ﬂ ashes of green). If private tones are enabled, you hear two

private tones.

The program you select operates until you change it. When you turn

your processor off and on again, it will return to the program and

settings you were using before you switched it off.

Understanding indicator lights

You see an indicator light when you perform a function (e.g. change the

program), or when there is a problem (e.g. processor battery is empty).

Indicator light What it means

Short ﬂ ashes of green

with a pause between ﬂ ashes.

You are turning on the processor.

The number of ﬂ ashes you see

corresponds to the number of the

selected program.

Short ﬂ ashes of green with a

pause between ﬂ ashes.

You are changing the program.

The number of ﬂ ashes you see

corresponds to the number of the

selected program.

Steady orange while

the lower button is pressed.

You are turning off your processor.

Short ﬂ ash of green. You are changing volume or

sensitivity level. This is available only

with the Advanced user interface.

Using your processor

195992 Iss3 CP810 user guide 01.indd 30 13/05/2009 4:24:37 PM