User's Manual

approximately four hours to recharge. As the battery ages, it may take

longer to fully recharge it. The battery charger has four sockets allowing

you to recharge four rechargeable battery modules at the same time.

To recharge the rechargeable battery module:

Remove the rechargeable 1.

battery module from the

processing unit.

Insert the rechargeable 2.

battery module into the

battery charger socket at a

slight angle as shown.

Rotate the rechargeable battery module in a clockwise direction 3.

until it is fully aligned with the alignment indicator marking on

the charger.

Connect the Global Power 4.

Adaptor to the battery

charger.

Plug the other end of the 5.

Global Power Adaptor into a

mains power outlet.

Replacing and recharging batteries

195992 Iss3 CP810 user guide 01.indd 42 13/05/2009 4:24:54 PM