User's Manual

Cochlear•

™

Nucleus

CP800 Series Personal Audio Cable for

connecting a battery-powered sound source (e.g. portable CD

player) to your processor. The Personal Audio Cable produces

monophonic sound.

To use the Personal Audio Cable, connect the processor end of the

cable to your processor and the other end to the battery-powered

sound source. Do not use the Personal Audio Cable to directly

connect to a mains powered sound source (e.g. TV).

Figure 13: Sound source end (1) and processor end (2) of the Personal Audio Cable

Cochlear•

™

Nucleus

CP800 Series Bilateral Personal Audio Cable

for connecting a battery powered sound source to two processors

(bilateral use). Use the shorter side of the cable for the left ear and

the longer side for the right ear. The cables are marked "L" (left)

and "R" (right) to avoid mixing them up. The Bilateral Personal

Audio Cable produces both monophonic and stereophonic sound,

depending on the sound system.

To use the Bilateral Personal Audio Cable, connect the processor

end of the cable to your processors and the other end to the

battery-powered sound source. Do not use the Bilateral Personal

Audio Cable to directly connect to a mains powered sound source.

Figure 14: Sound source end (1) and processor end (2) of the Bilateral Personal Audio

Cable

Cochlear•

™

Nucleus

CP800 Series Mains Isolation Cable for

connecting the Personal Audio Cable or Bilateral Personal Audio

Using audio accessories with your processor

195992 Iss3 CP810 user guide 01.indd 48 13/05/2009 4:25:08 PM